CEROX Marking Fluid
It is used for marking the stainless steel surfaces. In a fairly short period of time a high-contrast, corrosion free, permanent marking is obtained. It doesn’t cause cracking of the surface at high application temperatures and it doesn’t weaken the surface.
Application: Shake the drum before opening to make sure the solution is homogeneous. Wet the marking head of the marking machine with CEROX Marking Fluid. Place the template onto the surface. Press the marking head on the template. Once the marking process is completed, wipe up the surface with a dry microfiber cloth.
Caution: Do not apply it under sunlight. Do not apply it to hot surfaces. Beware that using moist and/or wet microfiber cloth for the application process and/or applying on a moist and/or wet surface may not result in adequate cleaning. Use goggles, gloves, and appropriate protective clothing during application. In case of skin contact wash the contact area with plenty of water. Store in a cool place away from direct sunlight. Ideal room temperature for application is 20°C.
Packaging: 500 ml plastic pack