CEROX Nozzle Paste
Weld spatter forms during welding (MIG/MAG welding, spot welding, etc.) and the weld spatter sticks and clogs the gas nozzles. To prevent the weld spatter adversities, before the welding process, hot gas nozzle is dipped in CEROX Nozzle Paste. CEROX Nozzle Paste creates a highly effective protective film around the gas torch. CEROX Nozzle Paste extends tip and nozzle life. It increases welding quality.
Advantages:
- Prolonged gaz nozzle life
- Reduced repair costs
- Optimum component protection
- Ready-to-use
- Economical use with a protective layer formation
- Silicon-free, solvent-free, biodegradable and environmentally friendly
- Non-hazardous and non-toxic
Application: Immerse the tip of the hot gas nozzle (2-5mm) into CEROX Nozzle Paste until the tip is coated. Continue with the welding process. If need be, clean CEROX Nozzle Paste with a solvent.
Caution: Use goggles, gloves, and appropriate protective clothing during application. In case of skin contact wash the contact area with plenty of water. Store in a cool place away from direct sunlight.
Packaging: 300 g tin cans (40 cans per package)