CEROX PRO-MIG Pickling Spray
It removes annealing colors, scales, pitting, corrosion and oxidation around the MIG-MAG welding steam and heat-treated areas on stainless steel surfaces and prepares the surface for passivation. It is suitable for large surfaces and non-removable structures. It is suitable for AISI AISI 904L-SAF2507 stainless steel types and their derivatives. It is applied with a pressure pump.
Advantages:
- Easy to apply spraying process
- Minimum toxic gas and nitrite products emission
- Homogeneous and lustrous surface
Reaction Time: (@20°C – cold rolled) 300 minutes
Consumption: 4 - 6 m²/kg
Application: Use CEROX FRD-100 Surface Cleaner to remove the contamination, grease and oil from the surface. Shake CEROX PRO-MIG Pickling Spray drum thoroughly before use. Add the purple powder to the drum and shake thoroughly to reach a homogenous consistency and wait for 10 minutes. Apply it with a high-pressure pump. Use a 100 – 150 bar high-pressure water jet to wash thoroughly. Let it dry by itself. Do not touch.
Caution: Do not apply it under sunlight. Do not apply it to hot surfaces. Beware that using moist and/or wet microfiber cloth for the application process and/or applying on a moist and/or wet surface may not result in adequate cleaning. Use goggles, gloves, and appropriate protective clothing during application. In case of skin contact wash the contact area with plenty of water. Store in a cool place away from direct sunlight. Ideal room temperature for application is 20°C. At colder temperatures increase the application time.
Packaging: 25 kg plastic drum