CERINOX T-100 Pickling Bath
(Stronger formula)
It removes annealing colors, scales, pitting, corrosion and oxidation around the welding steam and heat-treated areas on stainless steel surfaces and prepares the surface for passivation. It is suitable for submersible parts and structures. It is suitable for AISI 304-316-321 stainless steel types and their derivatives. It is applied by submersible the parts in the pickling solution.
Advantages:
- Minimum level of metal loss due to the specially developed strong formula
- Does not harm the surface and does not cause yellowing
- Results in a silver-colored, homogenous and permanent surface
Reaction Time: AISI 304, 304L etc.: 30 - 60 minute
Reaction Time: AISI 316, 321 etc.: 60 - 90 minute
Consumption: 10-15 m²/kg
Application: Use CEROX FRD-100 Surface Cleaner to remove the contamination, grease and oil from the surface. Place the part to be pickled into a container and pour in CERINOX T-100 solution. Depending on the contamination level, material type and application environment temperature, CERINOX T-100 can be diluted with water in 1:1 ratio. During the application process, stir the solution from time to time. Carry out the process in a well-ventilated area. Use a high-pressure water jet to wash thoroughly.
Caution: Do not apply it under sunlight. Do not apply it to hot surfaces. Beware that using moist and/or wet microfiber cloth for the application process and/or applying on a moist and/or wet surface may not result in adequate cleaning. Use goggles, gloves, and appropriate protective clothing during application. In case of skin contact wash the contact area with plenty of water. Store in a cool place away from direct sunlight. Ideal room temperature for application is 20°C. At colder temperatures increase the application time.
Packaging: 25 kg plastic drum